- What is Engineered Plastics?
- How hard is it to install your
ram air hood?
- Is your WS6 style ram air hood
an exact duplicate of the factory?
- Will water get into my intake
with you ram air hood?
- How much does your ram air hood
weigh?
- Do you offer an air box to make
your ram air hood functional?
- Do you offer your ram air hood
painted?
- How much horsepower will ram
air add to my vehicle?
- Does your ram air hood system
produce more HP than ram air hood with a cold
air intake?
- Is shipping included in your
price?
- What should I do if your product
comes damaged?
- Should I prefit your products
before I have them painted?
Q 1: What is Engineered Plastics?
A: Engineered Plastic is not just your
run of the mill plastic. Engineered plastic hoods are made by an automated machine and repeats the process perfectly every time, so your hood fits perfectly. It is made by blending
various high grade plastics together to create
a high grade plastic that will exhibit certain
characteristics such as high strength, high impact,
and/or high heat resistance to stand up to the
end use it was designed for and to meet engineering
specifications.
Q 2: How hard is it to install your ram air hood?
A: Our hoods come with detailed instructions
that show you how to easily install your hood
in about 30 minutes. It is recommended that you prefit your hood before installing hardware. Just install your hood and adjust it according
to the instructions provided. It's that simple!
Q 3: Is your WS6 style ram air hood an exact duplicate
of the factory?
A: There is a subtle difference in that
our hood design does not have the small grooves
around the ram air vents. We eliminated them for
a smoother-looking appearance. Our hood comes
with the original factory injection molded plastic
vent grilles and ram air decals to give it that
original OEM look.
Q 4: Will water get into my intake with your ram
air hood?
A. Our hoods have a built-in water management system consisting of four (4) built-in water shields to prevent water from getting in. To date, we have not had a complaint of water getting into an intake.
Q 5: How much does your ram air hood weigh?
A: 50-60 lbs.
Q 6: Do you offer an air box to make your ram
air hood functional?
A: Yes, an optional air box with high flow filter is available for several models as specified.
Q 7: Do you offer your ram air hood painted?
A: Yes, for an additional charge we can
paint your hood to OEM standard to match your
body color. We use PPG paint and base coat / clear
coat. We paint both top and underside of the hood.
When you receive your hood, it will have the air
vent grilles pre-installed. Ram air decals are included for you to install at your discretion. You can
install the hood on your vehicle in about 30 minutes.
Q 8: How much horsepower will ram air add to my
vehicle?
A: We have not performed any test, however, you will feel a noticeable power difference, especially when you accelerate at around 50-75 mph. More air is forced into the intake at a higher rate of speed and then generates the horsepower gain you will receive, especially in colder weather. The high flow filter will produce a more high performance sound from your vehicle's engine.
Q 9: Is shipping included in your price?
A: No, shipping is not included in the
product price. Click
here to look up hood shipping rates. You can
save money on shipping by having your order shipped
to a commercial address instead of a residence.
The cost is a $30 savings.
Q 10: Does your ram air hood system produce more
HP then ram air hood with a cold air intake?
A. Yes, where you see the term
"power hood" listed by the product, it
means that the hood delivers air to the intake
under pressure in a sealed system, which creates more HP then a cold
air intake that has to suck the air into the intake.
(See ram air comparsion on the side bar for more
info)
Q 11:
What should I do if your product comes damaged?
A. Even though we package our
products very well, occasionally the freight carrier
will damage our product. In that case, refuse
the shipment and do not sign for it.
It is expressly recommended that the package be opened and inspected immediately upon receipt, even if the box looks undamaged. CAUTION!!! If you sign
off with the freight carrier on a damaged product,
they will not honor any freight damage claim at
a later date and you will be held responsible.
CAUTION!!! If you are having
someone besides yourself receiving your package
you must make it clear to them that they are not
to sign off with the freight carrier until they
have inspected the product and found it to be
ok. If you have to refuse our product because
it was damaged, simply call us and we will send
you out another one ASAP. If you or someone else
signs off on a damaged product, we will not be
held responsible. You must refuse it!
Q 12:
Should I prefit your products before I have them
painted?
A. Yes, it is highly recommended that any hood be prefit before it is painted. This is especially true with fiberglass parts.
If you are not the original owner it is possible
that the vehicle was in a previous accident, which
could effect how our product fits you vehicle.
|
